Name

mpd-sima — mpd-sima will try to maintain some titles ahead in your play list following different policies.

Synopsis

mpd-sima [--daemon] [--config=conf_file] [--var_dir=var_directory] [--pid=pid_file] [--log=log_file] [--host=mpd_host] [--mpd_port=mpd_port] [--new-version]

mpd-sima [--var_dir=var_directory] [--create-db>]

mpd-sima [ { -h | --help } | --version ]

DESCRIPTION

This manual page documents briefly the mpd-sima commands.

At start up default configuration is first overridden by user configuration in mpd_sima.cfg (see the section called “FILES”) and finally command lines options are honored. For instance you can override default MPD_HOST set in defaults (localhost) or in your configuration file with -S my_mpd_server option. For default configuration see the section called “CONFIGURATION”.

EXAMPLE

Launch as a system service (dæmon).

Here follows an example on how to launch mpd-sima as a service on your system, not attach to regular user configuration/database.

mpd-sima --daemon --conf=/etc/mpd_sima.cfg --var_dir=/var/cache/mpd-sima/ --pid=/var/run/mpd-sima.pid --log=/var/log/mpd-sima.log

Launch in user land

Launching mpd-sima from/whithin your user acount is easy, you can simply call mpd-sima from your shell or one of the following command:

Background execution (dæmonise), log in the specified file, save pid:

mpd-sima --daemon --pid=$HOME/var/run/mpd-sima.pid --log=$HOME/var/log/mpd-sima.log

Foreground execution, connect my.mpd.server.org, log to std(out|err):

mpd-sima --host=my.mpd.server.org

OPTIONS

The program follows the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below.

-h, --help

Print help and exit.

--version

Print version and exit.

--daemon

Start as a daemon. Log redirected to /dev/null, usually setting --log and --pid options in daemon mode are a good idea to monitor/stop the process.

-p pid_file, --pid=pid_file

Use the specific file pid_file to store pid to.
Default is not to store pid info.

-l log_file, --log=log_file

Use the specific file log_file to log messages to.
Default is to log to stdout/stderr.

-c conf_file, --config=conf_file

Use the specific file conf_file to set up configuration instead of looking for the default user configuration file.
Default is to look for $XDG_CONFIG_HOME/mpd_sima/mpd_sima.cfg. Concerning this file see also the section called “FILES”.
Pay attention: Because you load a specific configuration file from command line interface does not mean it will override others options pass to mpd_sima. In other words launching with -P 6666 will override port setting whatever the configuration file your using, default or command line specified.

--var_dir=var_directory

Use the specific path var_directory to look for (or create) var files (ie. database) instead of looking at the default user data location.
Default is to look in $XDG_DATA_HOME/mpd_sima/. Concerning $XDG_DATA_HOME see also the section called “FILES”

--create-db

Create the database and exit. Uses folder specified with --var_dir or default directory.
Default is to use $XDG_DATA_HOME/mpd_sima/. Concerning $XDG_DATA_HOME see also the section called “FILES”

-S mpd_host, --host=mpd_host

Use the specific host mpd_host as MPD server.
mpd_host can be an IP or a fully qualified domain name as long as your system can resolve it. This overrides MPD_HOST environment variable.
Default is localhost.

See also the section called “ENVIRONMENT”.

-P mpd_port, --port=mpd_port

Use the specific port number mpd_port on MPD server. This overrides MPD_PORT environment variable.
Default is 6600.

See also the section called “ENVIRONMENT”

--new-version

Check and log for new version at start up (issue a warning).

FILES

${XDG_CONFIG_HOME}/mpd_sima/mpd_sima.cfg

The per-user configuration file. Usually XDG_CONFIG_HOME is set to ${HOME}/.config.

${XDG_DATA_HOME}/mpd_sima/sima.db

SQLite database. Usually XDG_DATA_HOME is set to ${HOME}/.local/share.

ENVIRONMENT

MPD_HOST, MPD_PORT

mpd-sima will look for MPD_HOST and MPD_PORT to override built-in configuration (set to "localhost:6600").

mpd-sima expects MPD_HOST syntax as documented in mpc manual, cf. mpc(1).
To use a password, provide a value of the form "password@host".

CONFIGURATION

mpd_sima.cfg

mpd_sima.cfg is read if present. Otherwise built-in defaults are used. An example should be provided in the tarball within doc/examples/mpd_sima.cfg. On Debian system please look in /usr/share/doc/mpd-sima.

DEFAULTS

Default is to look for MPD server at localhost:6600 (or MPD_HOST/MPD_PORT env. var. if set).

The default behavior is to add one track, this track is to be chosen among titles from artists similar to the artist of the currently played track. MPD_sima will add one track when the play list is one track long.

To change these defaults, use the configuration file mpd_sima.cfg

BUGS

The upstream BTS can be found at http://codingteam.net/project/sima/bugs.

FEEDBACK

The maintainer would be more than happy to ear from you, don't hesitate to send feedback on the forge, via the upstream BTS, the forum or the chat room, all available on the forge at http://codingteam.net/project/sima.

XMPP users are welcome to join the dedicated chat room at sima@conference.codingteam.net.

SEE ALSO

mpc(1), mpd(1), mpd-sima.cfg(5)

/usr/share/doc/mpd-sima/